factory-sealed LED luminaire for general illumination Explosion Proof LED Luminaires
High-performance LEDs and a solid-state electronic driver provide light where you need it, at a fraction of the operating costs of HID lighting technologies.
factory-sealed LED luminaire for general illumination Explosion Proof LED Luminaires Specification:
Hub Sizes | 3/4″ NPT; 1″ NPT; 1 1/2″ NPT; 25mm; 32mm |
Wattages | 80W; 100W; 130W; 151W; 175W |
Voltages | 120-277VAC 50/60 Hz; 108-250VDC |
Body and Mounting Modules Material | Copper-free aluminum with Corro-free™ epoxy powder coat |
Lens Material | Shatter-resistant, explosion proof glass |
Gasket Material | Silicone |
Guard Material | Stainless steel |
factory-sealed LED luminaire for general illumination Explosion Proof LED Luminaires Features:
- Quick-connect design – install and wire the mounting module, then simply screw in the luminaire
- Factory-sealed – no external sealing fittings required in Groups B, C, and D
- Adapter available for connection to existing Hazard•Gard® EVI, EVLP, and EVM modules
- Energy-efficient – up to 62% reduction in energy used versus equivalent HID fixtures
- 60,000 hours rated life – eliminates need for frequent lamp replacement
- Shock- and vibration-resistant solid-state luminaires have no filaments or glass components that could break – greatly reduces the risk of premature failure
- T5 temperature rating
- Operating ambient -25ºC to 65ºC
NEC and CEC:
- Class I, Division 1, Groups B, C, D
- Class I, Zone 1, Groups IIB + H2, IIB, IIA
- Class II, Groups E, F, G
- Class III, Simultaneous Presence
UL Standards:
- UL844 Electric Fixture Hangers for Hazardous Locations
- UL1598 Luminaire
- UL1598A Luminaire for Installation on Marine Vessels
CSA Standard:
- C22.2 No. 137
Environmental Ratings:
- NEMA 4X
- IP66
- Marine and Wet Locations
IEC and ATEX Certifications and Protection (Pending):
- Ex II 2G Ex d IIC (Zone 1, 2) (Pending)
- Ex II 2D Ex tD A21 IP66 (Zone 21, 22) (Pending)