年份：2013年

3 watts Infrared LED Light

3 watts Infrared LED Lights

led lights

At 2 inches wide by 2 inches tall,e, Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i. This IR LED light includes a high powered 3 watt LED emitter potted into an aircraft grade aluminum chassis that is designed to protect the LED and dissipate heat. Heat is the single largest factor in premature LED failure and color shifting. and LED10W series LED spotlights and floodlights are terminated with a Deutsch IPD / LADD DT04-2P connector,
Voltage Control, the light can be installed anywhere a 1/4 inch hole can be drilled. In other words.000 hours of use, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the most demanding environments, etc, LEDP10W. LEDP3W. We include a short male plug with 2 wires, Most Magnalight LEDLB, security and law enforcement. and boating. A small profile, depending on the model: A single stud protrudes from the bottom of the u-bracket mount. heavy equipment and vehicles where power systems don’t always operate with 12 volts and external generators.). Thus. operators can combine any number of units to achieve the power and dimensions required for most any application: vehicle system.e. conditions and applications, this LED light can be adjusted and tightened into any position to suit your application. Suspended on top of an adjustable u-bracket, by 2.5 inches deep, this fixture draws only a 1/4 amp on 12 volts and puts out an infrared beam that reaches 225 feet: Most LEDLB. the mounting hardware is stainless steel and the lenses are unbreakable polycarbonate,
The value in this IR LED fixture is in the power and form factor. This infrared light produces a beam that can only be seen through the use of night vision goggles or equipment,
Note. These units are also available in spot or flood configurations to allow a tighter beam for longer range or a wider beam for illumination of larger areas closer to the fixture, The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.

SPECIFICATION:

 Infrared LED Light IR Features
Lamp Type: Infrared LED Seoul Z-Power LED
Dimensions: 2″W  2″-H   2.5″-Depth Low Amp Draw
Watts: 3 Small Size
Led Drive %: 80% 50,000 Hour Service Life
Voltage: 9-42 VDC Shock Vibration Resistant
Lighting Configuration: 10° Spot or 35° Flood Ambient Op Temp -45C to 85C
Mounting: Adjustable U-Bracket Multi-Unit Connectable
Wiring: Deutsch IPD / LADD DT04-2P connector IP68 Rated*
Amps: 0.25 (on 12 volts) 0.13 (on 24 volts)
Lumens: N/A  
LED Light Color: Infrared 850Nm or 940 Nm  
LED Life Expectancy: 50,000 hours

ENELTEC says:If you want to know more about other products, please contact us.

How to solve the heat sink problem of Power LED high bay light

As the high power issue, the sink problem of Power LED high bay light is really a great problem, because the heat directly determine the life of the product, and the product life span and is related to the company’s reputation, good things do not go out, bad news travels, if the quantity order of Power LED high bay light meet with heat sink problems, it would be a bad news and joke throughout the world.

led high bay light
Every factory take a lot of cost on the heat sink system of Power LED high bay light, but still ineffective, as bulky, heavy, ugly appearance, if we can put some of the heat transfer to the shade, it would not only reduce the cost and weight, but also improve the cooling effect .
To get a good use of shade to heat, it must be addressed from the LED chip to the shade of the problem areas, the heat transfer interface must be less resistance from being able to small. Taking into account the cost advantage of COB, LED mining lamp future aluminum plate can be used in the form of COB, while aluminum substrate directly as LED mining lamp shade, heat transfer is at least one way interface, and the use of isolated power supply, safety too easy to pass, because even in case of plastic packaging current breakdown is less than 36V safety current.
Currently, ENELTEC says the best solution for the Power LED high bay light is micro capillary groove composite phase change cooling technologies. Small size and light weight. Thermal cooling effect. Principle is to use micro-channel structure able to pull the liquid heat transfer medium into a thin liquid film, light film heat to a thin liquid film, film vaporization take tremendous heat, steam radiator inside the confined space spread to radiator fins in contact with air, after cooling into a liquid heat transfer medium is recycled back to its original position.

3500K Flat LED panels

3500K Flat LED panels

Flat LED panels

3500K Flat LED panels Suitable for office, school, hospital, and medical facility applications. Nos. 33H476 to 33H480 are high-efficiency recessed flat panels that deliver accurate color rendering with minimal glare for superior light quality. Low-profile fixtures with integral driver are a great solution for rooms with lay-in grid ceilings. RoHS compliant. 5-yr. warranty.

SPECIFICATION:

CRI 85
Length 12-19/32″
Width 51-13/64″
Height 5-1/2″
Lumens 3510
Watts 45
Lumens Per Watt 78
Temp. Range -20 to 130 Degrees F
Rated Life 50,000 hrs.
Replaces 2 Lamp 32T8

ENELTEC says:If you want to know more about other products, please contact us.

Ceiling LED panel light

Ceiling LED panel light

ceiling LED panel light

Ceiling LED panel lights  highly efficient, aesthetically pleasing diffused light with minimal glare that can help enhance productivity. While off, they blend in with the ceiling pattern. Good for healthcare, retail, and office settings. Integral LED driver. Designed to fit in narrow ceiling plenums.

SPECIFICATION:

Item Ceiling LED panel light
Color Temp. 4000K
CRI 80
Length 12″
Width 48″
Height 2-1/2″
Lumens 3800
Voltage 120V-277V
Watts 47
Lumens Per Watt 80.8
Dimmable / Non-Dimmable Dimmable
Temp. Range -10 to 40 Degrees C
Rated Life 50000 hrs.
Replaces 4 Lamp T5, 2 LampT8, 4 Lamp T8. 2 Lamp Biax
Includes Integrated Driver
Warranty 5 year

ENELTEC says:If you want to know more about other products, please contact us.

4100K 46W LED Flat Panel light

4100K 46W LED Flat Panel light

LED Panel Light

4100K 46W LED Flat Panel light  Suitable for office, school, hospital, and medical facility applications. Nos. 33H476 to 33H480 are high-efficiency recessed flat panels that deliver accurate color rendering with minimal glare for superior light quality. Low-profile fixtures with integral driver are a great solution for rooms with lay-in grid ceilings. RoHS compliant. 5-yr. warranty.

SPECIFICATIONS:

Item LED Flat Panel
Color Temp. 4100K
CRI 90
Length 23-51/64″
Width 23-51/64″
Height 3-1/2″
Lumens 4222
Voltage 120V-277V
Watts 46.4
Lumens Per Watt 90
Dimmable / Non-Dimmable Dimmable
Temp. Range -30 to 130 Degrees F
Rated Life 50,000 hr.
Replaces 2 Lamp U32, 3 Lamp U32
Standards ETL/cETL, RoHS, Wet Location, Design Lights Consortium Certified
Includes Integrated Driver
Warranty 5 Year

ENELTEC says:If you want to know more about other products, please contact us.

3500K LED Flat Panel Fixture

3500K LED Flat Panel Fixture

Flat Panel Fixture

Compatible with building controls, motion sensors, timers, and daylight harvesting systems. Suitable for office, school, hospital, and medical facility applications. Nos. 33H476 to 33H480 are high-efficiency recessed flat panels that deliver accurate color rendering with minimal glare for superior light quality. Low-profile fixtures with integral driver are a great solution for rooms with lay-in grid ceilings. RoHS compliant. 5-yr. warranty.

SPECIFICATION:

tem Ceiling Fixture
Color Temp. 3500K
CRI 85
Length 25-19/32″
Width 25-19/32″
Height 5-1/2″
Lumens 3510
Voltage 120V-277V
Watts 45
Lumens Per Watt 78
Temp. Range -20 to 130 Degrees F
Rated Life 50,000 hrs.
Replaces 3 Lamp 25T8
Standards cETL, ETL Listed

ENELTEC says:If you want to know more about other products, please contact us.

LED Flat Panel light, Color Temp. 5000K

LED Flat Panel light, Color Temp. 5000K

LED Panel Lights

Compatible with building controls, motion sensors, timers, and daylight harvesting systems. Suitable for office, school, hospital, and medical facility applications. Nos.  high-efficiency recessed flat panels that deliver accurate color rendering with minimal glare for superior light quality. Low-profile fixtures with integral driver are a great solution for rooms with lay-in grid ceilings. RoHS compliant. 5-yr. warranty

SPECIFICATION:

Item LED Flat Panel
Color Temp. 5000K
CRI 84
Length 23-51/64″
Width 23-51/64″
Height 3-1/2″
Lumens 4018
Voltage 120V-277V
Watts 46.4
Lumens Per Watt 86.4
Dimmable / Non-Dimmable Dimmable
Temp. Range -30 to 130 Degrees F
Rated Life 50,000 hr.
Replaces 2 Lamp U32, 3 Lamp U32
Standards ETL/cETL, RoHS, Wet Location, Design Lights Consortium Certified
Includes Integrated Driver
Warranty 5 Year
Green Environmental Attribute Product Contributes To Reducing Energy Consumption

ENELTEC says:If you want to know more about other products, please contact us.

150LU-5K-AL23-W LED Highbay

150LU-5K-AL23-W LED Highbay

 

Generates less heat than most high-bay fixtures, making it an ideal replacement for 400W metal halide fixtures in light coolers and freezers. Optic system throws off no heat in the beam, allowing food to be kept next to fixtures without spoiling. Instant On, no start delay.LED highbay

SPECIFICATION:

Mfr. Model # 150LU-5K-AL23-WH
UNSPSC # 39112102
Ship Qty.  1
Sell Qty. (Will-Call)  1
Ship Weight (lbs.) 26.95
Number of Light Bars 8
Color Temp. 5000K
CRI 70
Length 22″
Width 22″
Height 25″
Watts 150
Lumens Per Watt 50
Temp. Range -25 to 25 Degrees C
Rated Life 50,000 hrs.
Standards CSA Certified

ENELTEC says:If you want to know more about other products, please contact us.

LED 120W High Bay Lighting

LED 120W High Bay Lighting

led high bay lighting

SPCIFICATION:

Input Voltage: AC110-240V
LED Source: Bridgelux
Frequency Range: 50~60Hz
Fixture Efficiency: >90%
Total Harmonic Distortion: <15%
Color Temperature: 6000±300K (Cool white)
Color Rendering Index (CRI): Ra80
IP Rating: IP44
Lumens: 10000Lm±5%
Working temperature -40°C~60°C
Material: Aluminum
Beam Angle: 120°
Lamp shade size: Dia500mm*H150mm
Heat sink Size: Dia160mm*H180mm
Power Box Size: 220mm*110mm
Finishing color: Black/Silvery
Warranty: 3 years
Working Life: 50,000 hours under normal use

Installation instructions for high bay
1. Tighten the hanging rings (M20 screw thread)
2. Put the hanging rings into the hook steadily.
3. In order to avoid electric leakage, please seal the wire connection when install.
3. Please do some measures to prevent water leakage when connect to the external
power supply.
4. Abide by local fire protection regulations.
5. Please ask professional electricians to install.
Note: Red is live wire (L), the blue one is Null wire (N), and yellow one is Earth wire.
ENELTEC says:If you want to know more about other products, please contact us.

 

ENT5 LED HighBay

ENT5 LED HighBay 

led highbay

Our T5 HighBay fluorescent solution offerswarehouse and industrial hall operators anaffordable way to cut their lighting energy bill.
Ready to install with lamps and waterproof external connectorincluded, there is no need to open the luminaire duringinstallation and it fits existing grids, because the product enablespoint-for-point replacement of 250 and 400 W HID high-baysOnce switched on, it delivers instant light, which can be dimmedas required. The watertight housing with integrated clip systemgives the luminaire a smooth appearance and makes it easyto clean.

SPECIFICATIONS

led highbay

ENELTEC says:If you want to know more about other products, please contact us.