年份：2013年

T8 LED Tube with 180 degrees rotatable end caps

T8 LED Tube with 180 degrees rotatable end caps

T8 LED Tube with 180 degrees rotatable end caps

Specifications:

  • Input voltage: 100 to 240, 277V AC, 12/24V DC
  • Light efficiency: >95lm/W (clear and wave cover)
  • Power factor: >0.93
  • Color temperature range:
    • Cold white: 6,000K
    • Commercial white: 3,000 to 3,500K

Features:

  • 180 degrees rotatable end caps and convenient user’s installation
  • Much longer lifespan than CFL tube: 10 years (minimum), suppose that light is on 8 hours/day
  • 70 to 80% energy-saving over fluorescent tubes
  • Solid state, high-shock and vibration resistance
  • Working without ballast with instant soft-start
  • No RF interference, flickering or buzzing
  • Quick and easy installation to minimize retrofit costs
  • Minimum maintenance costs produce little heat
  • No mercury and other hazardous materials
  • RoHS directive-compliant
  • Continuous operating for white LEDs (10 years for other colors)
  • Rated temperature: -4 to 104°F (-20 to 40 degrees Celsius)
  • Perfect for environments with extreme climates
  • Epistar and Intermatix LED packing solution, no patent trouble
  • Newest designs
  • Best cost-effective
  • Complete electricity isolation design, safety prove

ENELTEC remind you:If you want to know more about other products, please contact us.

T8 LED Tubes with 70 to 80% Energy-saving

T8 LED Tubes with 70 to 80% Energy-saving

T8 LED Tubes with 70 to 80% Energy-saving

Specifications:

  • 70 to 80% energy saving over fluorescent tubes
  • Solid State, high shock/vibration resistant
  • Work without ballast, instant soft-start
  • No RF interference
  • Quick and easy installation to minimize retrofit costs
  • No mercury and other hazardous materials, fully RoHS Directive-compliant
  • Continuous operation for white LEDs (10 years for other colors)
  • Rated to operating: -4 to 104°F [-20 to 40°C]
  • The newest design
  • The best cost-effective
  • Complete electricity isolation design
  • ETL certification

Technical parameters:

  • Standard length: 60, 120 and 150cm
  • Rated input voltage: 100 to 240V AC, 50 to 60Hz
  • Voltage: 277V AC
  • Power factor: >0.9
  • 12/24V DC is available
  • Light efficiency: >95lm/W

ENELTEC remind you:If you want to know more about other products, please contact us.

Notice on the Replacement of LED tube lights

The replacement of traditional lamps with LED tubes is very simple. Basically it can be directly replaced with the right lamp base and voltage. But there are still some other problems needing attentions.

Notice on the Replacement of LED tube light

1. The installation of LED tube lights: LED has constant current source in itself. Hence, there is no need for ballast and starter. Generally, constant current source can be installed inside lamps above the size of T8 because the inner space is big enough. Therefore, during installation, the original rectifier and starter could be removed and install the fluorescent lamp directly.

2. The voltage of LED tube lights: Although the fluorescent lamp of Geri photovoltaic has a wide voltage adaptability ranging from AC 85V to AC 245V, it will affect the power factor of constant current source if the voltage is too high or too low in the long-term. That is to say, it will cause a slight impact on energy saving efficiency and on the lifespan of constant current source. Therefore, it is generally better to choose fluorescent lamp in appropriate voltage. For instance, if the local voltage of a place is 110V, you should choose our specially designed 110V fluorescent lamp.

3. The cooling ability of LED tube: lamp produced in Geri photovoltaic has an aluminum radiator shell. Under normal circumstances, the heat dissipation is not a problem. However, if used in a dusty place, you should clean the dust regularly to prevent the dust from covering the radiator, thus affecting the heat dissipation.

4. LED tube lights is waterproof: it is made up with the upper part and the lower part. The upper part is an aluminum radiator and the lower part is a light sphere. Since there are gaps in the joints, it is important to prevent fumes and water vapor from entering into the gaps. If it is used under heavy fumes and water vapor, a protective cover is suggested (general protective cover is okay).

5. The quake-proof ability of LED tube lights: it has a strong anti-shock ability. It usually causes no damage if the knock is not very violent. But it may cause some impacts on the soft board. While traditional fluorescent lamp is made up of glass and inside the lamp is almost vacuum, vibration may cause explosion. Therefore, particular attention must be paid to it.

T8 LED Tube Lights Intematix LED Packing Solution

T8 LED Tube Lights Intematix LED Packing Solution

T8 LED Tube Lights Intematix LED Packing Solution

T8 LED Tube Lights Intematix LED Packing Solution Quick and easy installation to minimize retrofit costs,Complete electricity isolation design, safe.

Features:

  • Much longer lifespan than CFL tube: minimum of 10 years (suppose that light is on 8 hours/day)
  • 70 to 80% energy-saving over-fluorescent tubes
  • Solid-state, high-shock/vibration-resistant
  • Can work without ballast, instant soft-start
  • No RF interference, no flickering or buzzing
  • Quick and easy installation to minimize retrofit costs
  • Minimum maintenance cost, produce little heat
  • No mercury and other hazardous materials with the RoHS Directive-compliant
  • Continuous operating for white LEDs (10 years for other colors)
  • Rated to operate from -4 to 104°F (-20 to 40°C), perfect for environment with extreme climates
  • Epistar + Intematix LEDs packing solutions, no patent trouble
  • The newest design
  • The best cost-effective
  • Complete electricity isolation design, safe
  • ETL certification

Technical parameters:

  • Standard length
  • Rated input voltage: 100 to 240V AC, 50 to 60Hz, 277V AC (maximum)
  • Power factory: >0.9
  • 12/24V DC is available
  • Light efficiency: >95lm/W (clear and wave cover)

ENELTEC remind you:If you want to know more about other products, please contact us.

T8 LED U Tube with 18W Power and 168 Pieces LEDs

T8 LED U Tube with 18W Power and 168 Pieces LEDs

T8 LED U Tube with 18W Power and 168 Pieces LEDs

Applications:

  • With high-luminous flux and wide beam angle
  • U-shape tube is widely use in corridors, courtyard warehouse offices, hospitals, schools, factories, commercial lighting, shopping malls and more

Features:

  • High-luminous efficiency, more than 100lm/W
  • 80% energy-saving
  • Replace to 100W halogen lamps
  • Main materials: aluminum + PC
  • Minimum maintenance costs, produce little heat
  • No mercury and other hazardous materials, fully RoHS compliant
  • Continuous operating for white LED (10 years for other colors)
  • 20 to 40°C, perfect for environment with extreme climates
  • Epistar + Intematix LED packing solution, no patent trouble
  • The newest design
  • The best cost-effective

Technical parameters:

  • Rated input voltage: 100 to 240V AC, 50 to 60Hz
  • Maximal input voltage: 277V AC
  • Power: 18W
  • Beam angle: >120° (indicated in the picture)
  • Light output:
    • Cold white (6,000K): 1,889lm (clear cover)
    • Cold white (6,000K): 1,702lm (frosted cover)
    • Warm white (3,070K): 1,803lm (clear cover)
    • Warm white (3,070K): 1,674lm (frosted cover)
  • Cover: PC clear/PC frosted
  • Base type: T8
  • LED quantity: 168 pieces (3014)
  • IP grade: IP20
  • Rated to operate from -4 to 104°F (-20 to 40°C) perfect for environment with extreme climates

ENELTEC remind you:If you want to know more about other products, please contact us.

T8 LED Tube Lights with 12/24V DC Available

T8 LED Tube Lights with 12/24V DC Available

T8 LED Tube Lights with 12/24V DC Available

T8 LED Tube Lights with 12/24V DC Available Top quality at very competitive prices.  Expedited service for volume orders. Save energy.  Save maintenance and energy $$.

Features:

  • Much longer lifespan than CFL tube: minimum of 10 years (suppose that light is on 8 hours/day)
  • 70 to 80% energy-saving over-fluorescent tubes
  • Solid-state, high-shock/vibration-resistant
  • Can work without ballast, instant soft-start
  • No RF interference, no flickering or buzzing
  • Quick and easy installation to minimize retrofit costs
  • Minimum maintenance cost, produce little heat
  • No mercury and other hazardous materials with the RoHS Directive-compliant
  • Continuous operating for white LEDs (10 years for other colors)
  • Rated to operate from -4 to 104°F (-20 to 40°C), perfect for environment with extreme climates
  • Epistar + Intematix LEDs packing solutions, no patent trouble
  • The newest design
  • The best cost-effective
  • Complete electricity isolation design and safe
  • ETL certification

Technical parameters:

  • Standard length
  • Rated input voltages: 100 to 240V AC, 50 to 60Hz, 277V AC (maximum)
  • Power factory: >0.9
  • 12/24V DC is available
  • Light efficiency: >95lm/W (clear and wave cover)

ENELTEC remind you:If you want to know more about other products, please contact us.

60, 120 and 150cm T8 LED Tubes

60, 120 and 150cm T8 LED Tubes

60, 120 and 150cm T8 LED Tubes

60, 120 and 150cm T8 LED Tubes Much longer lifespan than CFL tube: minimum 10 years (at an average usage of 8 hours per day).Quick and easy installation to minimize retrofit costs.

Features:

  • Much longer lifespan than CFL tube: minimum 10 years (at an average usage of 8 hours per day)
  • 70 to 80% energy-saving over-fluorescent tubes
  • Solid state, high-shock/vibration resistance
  • Work without ballast
  • No RF interference, no flickering or buzzing
  • Quick and easy installation to minimize retrofit costs
  • Minimum maintenance costs, generates little heat
  • No mercury and other hazardous materials, fully RoHS directive-compliant
  • Continuous operating for white LEDs (10 years for other colors)
  • Rated to operate from -4 to 104°F (-20 to 40°C), perfect for environments with extreme climates
  • Epistar + intimate LED packing solution, non patent-infringing
  • Modern design
  • Highly cost-effective

Specifications:

  • Standard length: 60, 120 and 150cm
  • Rated input voltage: 100 to 240V AC, 50 to 60Hz
  • Input voltage: 277V AC (maximum)
  • Power factor: >0.91
  • 12/24V DC is available

ENELTEC remind you:If you want to know more about other products, please contact us.

Technical standards for LED streetlight

Currently, LED lighting technology becomes more and more mature. The light effect of high-power LED has reached 80lm / W or more, which makes the energy saving reform of streetlight in city possible. LED streetlight, especially high-power LED streetlight, is striking the traditional streetlight market at a rapid pace.

technical standards for led street light

　　The general technology standards of current LED streetlight introduced by ENELTEC are as follows:

1. Light conversion rate: 17%. (The amount of solar energy per square is 1000W, actual utilization efficiency is 170W)

2. The current lens of market streetlight are improved optical materials, transmittance ≥ 93%, temperature resistance is from -38 degree to +90 degree.

3. The light spots of lens mainly used for LED streetlight are in rectangular. These lens use PMMA optical materials, transmittance ≥ 93%, temperature resistance is from -38 degree to +90 degree, resistance to UV yellow rate reaches 30,000 hours without change.

4. The average illumination of the uniformity of road surface illumination is 0.48. Light spot ratio is 1:2

5. It meets the road illumination. (Actual 1/2 center spot reaches 25LUX, 1/4 center beam intensity reaches 15LUX, the minimum light intensity of 16 meters is 4LUX, overlapping light intensity is about 6LUX.

6. It has a very good application prospect in the new city lighting. When dimming for depth, it does not change the colors and other characteristics

7.Working humidity: ≤ 95%

8. Warranty: 2 years

Newest T5 LED Tubes 4-year Minimum Longer Lifespan

Newest T5 LED Tubes 4-year Minimum Longer Lifespan

T5 LED Tubes with 0.86 to 0.92 Power Factor

ENELTEC LED Tubes offer dramatically reduced operating costs over their super long life due to their efficiency. LED does not contain the harmful mercury and phosphorus that is found in fluorescent lights making them even more environmentally friendly.

Technical data:

  • Standard length: 517, 1,198mm
  • Wide input voltage: 100 to 240, 277V AC, 24/12V DC available
  • Power factor range: 0.86 to 0.92
  • Power efficiency: >86%
  • Color temperature range:
    • Warm white: 2,700 to 3,200K
    • Natural white: 4,000 to 4,500K
    • White: 5,500 to 7,000K

Features:

  • Longer lifespan than fluorescent tube: minimum 4 years
  • 70 to 80% more energy-saving than fluorescent tubes
  • Solid state, high-shock/vibration-resistant
  • Working without ballast
  • No RF interference
  • No flickering or buzzing
  • Quick and easy to installation to minimize retrofit costs
  • Instant soft-start
  • Minimum maintenance costs
  • Produce little heat
  • No mercury and other hazardous materials, fully RoHS Directive-compliant
  • Continuous operating for white LEDs (10 years for other colors)
  • Rated to operate from -40 to 122°F (-40 to 50°C), perfect for environment with extreme CL inmates

Advantages over-counterparts:

  • Much higher light output
  • Acrylic front cover: never get broken easily
  • Aluminum back cover: better heat-dissipation and thus longer lifetime for the LEDs
  • Use SMD LED with best lumen maintenance
  • Use protection diodes for each LED
  • No hazardous materials and fully RoHS Directive-compliant
  • Strong packing method

ENELTEC remind you:If you want to know more about other products, please contact us.

T5 LED Tubes with 0.86 to 0.92 Power Factor

T5 LED Tubes with 0.86 to 0.92 Power Factor

T5 LED Tubes with 0.86 to 0.92 Power Factor

T5 LED Tubes with 0.86 to 0.92 Power Factor are now replacing fluorescent tubes as a more efficient and environmentally friendly way of lighting while also replacing lower quality LED tubes that don’t live up to their estimated long life.

Primary Competitive Advantages:
  • Brand-name Parts
  • Form A
  • Packaging
  • Quality Approvals
  • Country of Origin
  • Green Product
  • Price
  • Reputation
  • Guarantee/Warranty
  • Product Features
  • Service
  • Electronic Link
  • International Approvals
  • Product Performance
  • Small Orders Accepted
  • Experienced Staff
  • Military Specifications
  • Prompt Delivery
Key Specifications/Special Features:
  • Top 3528 SMD LED
  • Standard length: 517 and 1,198mm
  • Luminous flux:
    • 517mm: 648/555lm in white and 633/536lm in warm white
    • 1,198mm: 1,374/1,177lm in white and 1,316/1,087lm in warm white
  • Power factor: 0.86 to 0.92
  • Protection for each LED
  • If one LED has problem, all others can still work well

ENELTEC remind you:If you want to know more about other products, please contact us.